Carbon Fiber Cold Air Intake System for 2006-2010 Honda Ridgeline

This product data sheet is originally written in English. Ø BlingLights manufactures its intakes from genuine ultra-light weight carbon fiber and a Carbon Fiber Reusable Open Top Fabric Filter. BlingLights Cold Air intake systems deliver the best looks, performance, value and ease of installation than any other cold air intake. BlingLights Cold Air intakes install easily under the hood. Ø BlingLights filters are completely shielded from drawing in warm air with the 360 degree attractive genuine carbon fiber heat shield.

Built-in filter uses the newest open top design for increased air flow over conventional cone filters. Ø BlingLights unique non-woven synthetic filter media encased within the carbon fiber enclosure never needs oil! This means less down time between cleanings and no more chance of over-oiling.

It takes the guesswork out of servicing your air filter Ø BlingLights filters dirt invisible to the human eye, and never needs filter oil! Ø Hi-flow flex pipe is rigid yet weighs less then that of any of the materials used by competitors. Ø Element is cleanable and is Made for Life! Ø Carbon Fiber Open Top Heat Shield Ø Open Top Filter for Increased Flow Ø Reusable Filter, No More Replacing Ø Flexible Extendable Piping more chance of over-oiling. Carbon Fiber Reusable Open Top Fabric Filter.

Amber Reusable Closed Top Fabric Filter. 3.1 Pounds Total Weight! 9.5 Pounds Total Weight.

10.7 Pounds Total Weight. Genuine Light Weight Carbon Fiber.

Silver of Chrome Paper Thin Aluminum Piping. Slight Growl During Hard Acceleration. Vacuum Cleaner Sound Due to Restricted Flow. On Average 15 - 20 HP Gain.

Inflated Claims but on Average 15 - 20 HP Gain. Possible Decrease in HP Due to Restricted Flow. Brushed cotton twill, six panel, sandwich bill, relaxed crown, self-fabric strap with metal closure and tuck-in design. Sport the name and show your pride. When you hookup a BlingLights intake, you will notice the difference the next time you drive your vehicle.

Our BlingLights Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too. BlingLights Intake Kits are the correct diameter for each engine type and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood.

Each kit is designed to provide power throughout the RPM range. BlingLights intakes take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box. These kits bring engine airflow out of the factory box by providing a large size open-air conical High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a name brand replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required.

The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials. Why Does The Factory Intake Need to be Improved? Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter.

An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine.

That's where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake, so go ahead and wake the sleeping giant in your car. Why Does BlingLights Make Such a Big Deal about Carbon Fiber? In addition to vehicle power, the overall weight of the vehicle is very important to overall acceleration.

In general terms, a weight reduction of 100 pounds will lower the ET by. Carbon fiber, a black fabric weave held together by a transparent resin, weighs one-third to one-fifth as much as similar-strength steel but is seven to 10 times as expensive. Slicing weight dramatically improves fuel economy and performance, and is why carbon fiber is used in race cars and jet planes. Carbon fiber helps keep the weight of the 505-horsepower speedster down. BMW's M6 coupe, on sale in Europe, has an unpainted carbon-fiber roof.

Not only does it save weight, it's beautiful to look at and has a high-tech feel. How Much of an Increase in Miles Per Gallon Should I see from using a BlingLights Intake? Results will vary depending on your vehicle, driving habits, load on the engine (towing for example), existing air system restriction, and other factors. Many BlingLights users report an increase in miles per gallon. Our internal testing is performed using employee and customer vehicles.

We usually have the cars for a short period of time that will only allow for fit checks. If you take advantage of added power by driving harder, you will not see much of a gain, if any, in MPG.

Can I Install and Maintain the Intake Myself? The kit isn't complicated too install for most application, and the work can be done in your driveway with simple hand tools in about an hour.

We recommend to have the kit installed at stereo shop if you are uncomfortable installing on your own. If you do it yourself, you will need a wrench, a ratchet, and a screwdriver.

Every 50,000 miles clean the filter with filter cleaner found at your local auto shop. No need to ever replace the filter. Is the BlingLights Intake Street Legal?

In most states our intakes are legal. Our intake kits may not be legal in states where under the hood modifications are not allowed. Check your local laws if you are unsure. The only time this can happen is from improper installation that causes damage to a vehicle system.

What If My Vehicle has Air or Vacuum Tubes on the Original Intake? Our Intake Includes an Accessory kit with a tool and grommets to hook up your existing vacuum and air lines. Again if you feel uncomfortable installing, we recommend bringing the vehicle into your local stereo shop for a hassle free install. Where does my MAF sensor hook up?

Most Dodge and Jeep vehicles do not use this sensor. All Mount Accessories Included, Quick Replacement & Easy To Install. MAF Sensor Adapter not included. This is required for some vehicles Will Fit Most Domestic & Import Vehicles From Race Cars, Street Cars, SUVs, Trucks and Vans. What Our Customers Have to Say.

I was very pleased with the increased power and torque, but I was most excited by the increased throttle response. I knew that this wasn't a supercharger, and I wasn't a two hour bolt on away from being a Corvette beater, but 15 hp is a great place to start.

Eturned merchandise must be 100% unused by any trials, testing or other signs of wear. In addition to vehicle power, the overall wei.

This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Other Air & Fuel Delivery". The seller is "blinglights-auctions" and is located in this country: US. This item can be shipped worldwide.

Part brand: Blinglights
Brand: BlingLights
Manufacturer Part Number: ram-ridgeline