Eventuri Audi RS3 8Y 2020- Carbon Fibre Intake Induction Kit

  
Eventuri Stage 3 Carbon Fibre Intake Induction Kit For Audi RS3 8Y 2.5 2020. Please Note - Carbon engine cover not included. Following our RS3 8V system, we have updated the fitment to now include the 8Y.

The RS3 8Y intake system caters for all power levels from stock to those exceeding 1000whp. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible.

Each component has been designed to provide the turbo with a smooth and free flowing path. The patented Venturi housing has been designed to provide the maximum internal volume possible for the RS3 engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. The RS3 8Y Eventuri system uses our Patented Carbon fiber Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect. Tests were done on the same day in controlled conditions using the same test jig for each system. We tested our full intake system against the stock airbox system.

The results show just how restrictive the stock airbox is, which we have managed to improve by up to 58% in maximum possible flow rate. Importantly this has been achieved with a sealed intake system so the intake temperatures will also be maintained at a minimum. Dyno Testing Our RS3 Intake has been tested by various reputable tuners globally who have been building high powered RS3/TTRS projects for road and track use.

The first set of results are from MSL Performance who tested our system on a stock 8Y RS3. Tests were done on the same day back to back. As can be seen, there is a measurable gain throughout the RPM range of up to 22hp. This gain even on a stock car is noticeable on the road with better throttle response and quicker acceleration. The next set of results are from BR Performance Netherlands who tested our system on a TTRS equipped with a TTE700 hybrid turbo. Tests were done on the same day back to back with the hood closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4 turbo inlet tube which is an additional product - details can be seen on our Audi products page. Stock Airbox with Modified Stock Turbo Inlet for TTE700 = 576.5 HP.

Eventuri Stage 3 Intake with Modified Stock Turbo Inlet for TTE700 = 606.5 HP. Eventuri Stage 3 Intake with Eventuri Turbo Inlet for TTE700 = 620.8 HP. Our RS3 intake has also been tested on full frame turbo builds pushing the limits of the DAZA engine. Recent tests from Eurocharged Canada used our stage 3 intake to achieve 1010whp which further proves the flow capability of the Eventuri system. During testing, Eurocharged tuners commented that they were able to make more power at a lower boost setting using our stage 3 intake in comparison to other systems they had been using.

Their RS3 has already achieved a 9.1 second quarter mile pass with a 160mph terminal speed and are well set to go under 9 seconds soon. Please note: The majority of Eventuri orders are processed straight away, but occasionally some applications have to be special ordered which may take around 4-6 weeks to dispatch. If there will be any delays in your order you will be informed within 24-48 hours. Image for illustration purposes only.